26
DANGER ZONE
1 .
Set up the obstacle course.
Do not
place obstacles over any lights.
2 .
Place a ball in either of the two start spaces.
3 .
Turn on the console.
4 .
When the console says, “Select game,” press SELECT (white button) until you hear
“Danger Zone.” Press ENTER (gray button).
5 .
Press SELECT to choose the number of players (from 1 to 4) and press ENTER.
6 .
Press SELECT to choose the difficulty (Beginner, Intermediate or Advanced) and press ENTER.
Easier difficulty settings will give you more time to escape each danger zone.
7 .
The console will tell the first player to “Put on the headset.” When the headset is in place and
turned on (see Quick Start section), press SELECT.
8 .
Before the game will begin, the fan nozzle must be positioned underneath the calibration point
– this is the “ready” position for the fan. If it is not there, the console will direct you to “Rotate
fan to calibration point.” Move the fan nozzle under the calibration point and leave it there. The
unit will buzz to confirm that you are in position.
Number of Players:
1-4
Difficulty Levels (Time Limit):
Beginner (1 minute/zone)
Intermediate (45 seconds/zone)
Advanced (20 seconds/zone)
Object:
Escape 4 danger zones
before time runs out or your
game ends! Beat your best
time or compete against
other players – the shortest
time wins!
The First Danger Zone
THE GAMES
