- 11 -
7-2. Setting the Moving Average (Number of Times the Moving Average is Taken)
Note: The number of times that can be set for the moving average is from 1 to 90 (times).
If a number between 91 and 99 is input and [STO] is pressed, 90 will be set automatically.
7-3. Setting Sampling Time for Automatic Entry and Setting Operation
Note: The sampling time can be set from 1 to 60 (minutes).
If a value between 61 and 69 is input and [STO] is pressed, 60 will be set automatically.
7-4. Simulation
The sensor is equipped with simulation function that enables operation checks of externally
connected devices.
Displays measurement results.
(Flow rate in % is shown.)
With the moving average setting on display, enter a value to be set.
The numeric character which is flickering can be changed.
Use [ ] to change the flickering position, [ ] to change the numeric
character, and [STO] to store the entered value.
Displays measurement results.
(Flow rate in % is shown.)
Press [ ], [ ],
and [STO].
Press [MOD]
three times.
Displays measurement results.
(Flow rate in % is shown.)
With the simulation mode on display, enter a value to be set.
The numeric character which is flickering can be changed.
When the value is changed, the electric current of the new
value will be output.
Use [ ] to change the flickering position, [ ] to change the
numeric character, and [STO] to end simulation and display the
measurement result.
Displays measurement results.
(Flow rate in % is shown.)
Press [ ], [ ],
and [STO].
Hold down [MOD] for
three seconds or longer.
Displays measurement results.
(Flow rate in % is shown.)
With the sampling time setting for automatic entry and
setting operation on display, enter a value to be set.
The numeric character which is flickering can be changed.
Use [ ] to change the flickering position, [ ] to change the
numeric character, and [STO] to store the entered value.
Displays measurement results.
(Flow rate in % is shown.)
Press [ ], [ ],
and [STO].
Press [MOD]
four times.
