－
11
－
8-1.Display Unit Setting
【
Menu
：
1-1-1
】
The item selects and sets the display unit.
Selection range
：
%, ton, m, ft, Pa, kPa MPa, bar, kgf/cm2, psi, mg/m3,
µ
g/m3
m3/h, ft3/h, t/h, kg/h, lb/h, mL/s, °C, °F, mA
，
blank
（
default value
：
%
）
+ ×2
O K ×1
O K ×1
5 0.0
％
Menu 0
▶
1. Basic setup
2. Test
3. Reset
4. Language
5. Device info
Basic setup 1
▶
1. Display
2. Relay output
3. Analog output
(S. failure mode)
4. Damping
5. Failure setup. In
Display 1-1
▶
1. Displayed unit
2. Decimal point
3. Scaling
Displayed unit 1-1-1
▶＊
%
ton
m
f t
Pa
kPa
Displayed unit 1-1-1
＊
%
ton
▶
m
f t
Pa
kPa
Display 1-1
▶
1. Displayed unit
2. Decimal point
3. Scaling
5 0.0
ｍ
ESC ×3
O K ×1
O K ×1
For example, the display
Unit is changed from
“%” to “m”.
O K ×1
(Use the + button to move the
▶
mark to “m”)
( Return to the previous
menu
screen )
(Measuring screen)
(Measuring screen)
(Use ESC button to return to
the measuring screen)
(Storing setting)
※
If the desired unit does not exist in the
Display unit options, select “blank”.
“blank” = No unit
“blank” follows “mA”.
Displayed unit 1-1-1
＊
%
ton
▶
m
f t
Pa
kPa
ESC ×1
