GB-20
INSTRUC
TION
M
ANU
AL
SECTION 7: WHAT TO DO IF...
If a problem does occur, it may often be due to something very minor. The following table
may be able to resolve the problem.
FAILURE
PROBABLE CAUSE
SOLUTION
Your machine does not
operate.
It is unplugged.
Insert the plug into the
mains socket.
Your fuse is defective.
Change your fuse.
The electric power is off.
Check the electric power.
Start/Pause button has not
been pressed.
Press the Start/Pause button.
The programme control is in
0 (off) status.
Bring the programme control
on the desired status.
The door is not shut
properly.
Shut the door properly. You
should hear a click.
Child lock is active.
See page 13.
Your machine does not
receive water.
Water tap is closed.
Open the water tap.
The water inlet hose may be
bent.
Check the water inlet hose.
The water inlet hose is
obstructed.
Clean the filters of the water
inlet hose. (*)
The valve inlet filter is
obstructed.
Clean the valve inlet filters. (*)
The door is not shut
properly.
Shut the door properly. You
should hear a click.
Your machine is not draining
water.
The drain hose is obstructed
or bent.
Check the drain hose.
The pump filter is obstructed. Clean the pump filter. (*)
The clothes are not placed
inside the machine in a well-
balanced manner.
Spread the clothes inside the
machine in an orderly and
well-balanced manner.
Your machine is vibrating.
The feet of your machine are
not adjusted.
Adjust the feet. (**)
Transportation screws are
not removed.
Remove transportation
screws. (**)
(*) See the section concerning the maintenance and cleaning of your machine.
(**) See the section concerning installation of your machine.
M100WM10E_20100209_without PN.indd 20
