GB-11
INSTRUC
TION
M
ANU
AL
• For excessively dirty clothes, select a programme with pre-washing. Put ¼ portion of
detergent into compartment 1 and the remaining portion into compartment 2.
• Only use detergents developed especially for automatic washing machines. The
quantities that will be used for your clothes are written on the detergent packaging.
• As the hardness of your water increases, the amount of the detergent to be consumed
will also increase.
• As the amount of your clothes increases, the amount of the detergent to be consumed
will also increase.
• Put softener in the softener compartment in the detergent drawer. Do not exceed the
MAX level. Otherwise, the softener will diffuse in the washing water via the siphon.
• Concentrated softeners should be diluted with some water before filling in the drawer.
This is because the softener with a high density can obstruct the siphon and prevent
the correct flow of the softener.
• You can use fluid detergents in all programmemes without pre-washing. For this, mount
the fluid detergent level plate in the second compartment of the detergent drawer and
arrange the amount of fluid detergent according to the levels on this plate.
RUNNING.THE.MACHINE....
Starting the programme
• Adjust the programme control to a programme you desire.
• The programme ready light will illuminate.
• If you want, you can select one or more additional functions.
• Run the programme which you have selected by pressing the Start/Pause button.
Changing the programme
If you have selected a programme and you do not want it to continue:
• Press the Start/Pause button.
• Adjust the programme control to 0 (off) position.
• Adjust the programme control to the programmeme you want. (You can select the
programme that you desire from page 10-11).
• The programme ready light will illuminate.
• Press the Start/Pause button to begin the programme.
Cancellation of the Programme
If you desire to end a running programme early:
• Press the Start/Pause button.
• Turn the programme control to 0 (off) status.
• Turn the programme control to “Draining” or “Spinning” programmes.
• The programme ready light will illuminate.
• Run the programme you have selected by pressing the Start/Pause button.
M100WM10E_20100209_without PN.indd 11