GB-17
INSTRUC
TION
M
ANU
AL
THE.CABINET
Clean the exterior surface of the cabinet of your machine with lukewarm water and a
cleaning substance that will not damage the cabinet. After rinsing with clean water, wipe it
with a soft and dry cloth.
If the machine is installed in a location where the ambient temperature can
fall below 0 ˚C, ensure the following procedure are used when not in use:
• Connect the machine to the mains supply.
• Close the water tap and pull out the water inlet hose or hoses from the tap.
• Place the ends of the water drain and water inlet hoses into a bucket on the
ground.
• Adjust the programme knob to “Draining” programme.
• The programme ready light will illuminate.
• Run the programme by pressing the Start/Pause button.
• Unplug your machine when the programme is over (programme end light is
on).
When you have completed this process, the remaining water inside the machine will be
drained. This will prevent the formation of ice in the machine. When you operate your
machine again, be sure that the ambient temperature is above 0 ˚C.
THE.DRUM.
Do not leave metal items like needles, staples or coins inside your machine. These items
cause rust stains on the drum. To eliminate these stains, use a suitable cleaning substance
and follow the manufactures recommendations. When cleaning rust stains, never use
scouring pads or similar rough objects.
REMOVAL.OF.LIME.FROM.YOUR.MACHINE
If you use the correct amount of detergent, there will be no need for lime removal. However,
if you wish to remove limescale, you may purchase lime protectors and pay attention to their
warnings.
The lime eliminating substances contain acids and this may cause colour
modifications in your clothes along with an adverse effect on your machine.
M100WM10E_20100209_without PN.indd 17
