13
Jumper JP3: CPU Clock Selector
This jumper selects the processor clock frequency.
CPU Clock
Pins 1-2
Pins 3-4
133 MHz
Off
Off
166 MHz
Off
On
100 MHz
On
Off
200 MHz
On
On
Install the Mainboard
Install the mainboard in a system chassis (case). The board is a
FLEX ATX size mainboard. You can install this mainboard in an
ATX case. Ensure your case has an I/O cover plate that matches
the ports on this mainboard.
Install the mainboard in a case. Follow the instructions of the case
manufacturer to use the hardware and internal mounting points on
the chassis.
Connect the power connector from the power supply to the
CN3
connector on the mainboard.
J3
is the CPU Vcore power connector.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
SYS_FAN1
fan power connector
on the mainboard.
Connect the case switches and indicator LEDs to the
PANEL1
connector.
Pin Signal
Pin Signal
CN3
J3
1
PANEL1
SYS_ FAN1
1
Содержание MS8188E Series
Страница 4: ......
