15
USB2: Front panel USB Connector
The mainboard has USB ports installed on the rear edge I/O port
array. Additionally, some computer cases have USB ports at the
front of the case. If you have this kind of case, use auxiliary USB
connector USB2 to connect the front -mounted ports to the
mainboard.
Pin Signal
Pin Signal
1
VERG_FP_USBPWR0 2
VERG_FP_USBPWR0
3
USB_FP_P0-
4
USB_FP_P1-
5
US
6
US
7
GROUND
8
GROUND
9
KEY
10
USB_FP_OC0
1.
Locate the USB2 connector on the mainboard.
2.
Plug the bracket cable onto the USB2 connector.
3.
Remove a slot cover from one of the expansion slots on the
system chassis. Install an extension bracket in the opening.
Secure the extension bracket to the chassis with a screw.
J6: USB Card Reader Connector (optional)
This connector is for connecting internal USB card reader. You can
use a card reader to read or transfer files and digital images to your
computer.
Pin Signal
Pin Signal
1
VCC
2
USB-
3
USB+
4
GND
5
KEY
The J6 is shared with one of the USB ports of the I/O back
panel. The USB port is located beside the VGA port
connectors. See “I/O Ports” for more information.
Please check the pin assignment of the cable and the USB
header on the mainboard. Make sure the pin assignment
will match before plugging in. Any incorrect usage may
cause unexpected damage to the system. The vendor won’t
be responsible for any incidental or consequential damage
arising from the usage or misusage of the purchased
product.
Содержание MS8188E Series
Страница 4: ......
