18
Return the jumper cap to the Normal operation setting. Recon-
nect the power cables and start the system. When the POST
starts, press the delete key to start the BIOS Setup Utility and
reload BIOS optimal settings. Refer to Chapter 3 for information
on BIOS.
Function
Jumper Setting
Normal operation
Short pins 1-2
Clear CMOS
Short pins 2-3
JP1
1 2 3
JP5: Suspend to RAM support enable/disable jumper
Use this jumper to enable or disable the Suspend to RAM (STR)
Function. You must also enable this function in the BIOS Setup
Utility. Refer to Chapter 3.
Function
Jumper Setting
Enable
Short pins 1-2
Disable
Short pins 2-3
JP5
1 2 3
JP6: USB1 wake up jumper
Use this jumper to enable a signal to the USB ports (located on
the I/O port panel) to wake up the system from power saving
mode.
Function
Jumper Setting
Disable
Short pins 1-2
Enable
Short pins 2-3
JP6
1 2 3
JP7: CPU frequency select jumper
This jumper enables you to force the CPU to clock at a higher
frequency than it is rated. Short pins 2 and 3 to force the CPU to
run at a 100 MHz FSB instead of a 66 MHz FSB. We recom-
mend that you leave the jumper on the normal operation setting.
Function
Jumper Setting
Normal
Short pins 1-2
Force 66 MHz FSB to
run at 100 MHz FSB.
Short pins 2-3
JP7
1 2 3
