Matrox Solios eA Скачать руководство пользователя страница 165

Страница: 165 / 196

Major revisions of Matrox Solios 165

SOL6M4AE*

100

First shipping version.

101

Upgraded the PCI-X to PCIe bridge to a new version. This was a corrective
action. For more information, refer to product bulletin MIPB-67.

102

Modified the power-up sequence of the PCIe bridge. This was a corrective
action. For more information, refer to product bulletin MIPB-77.

103

Moved to secondary source for A/D. This was done to ensure availability.

104

Improved product packaging.

105

Replaced a pull-up resistor so that stronger PCIe interrupt signals could be
transmitted. This was a preventive action.

106

Changed the default acquisition firmware.

107

Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.

SOL6M4A30546*

200

First shipping version.

201

Added termination resistors to the interface of the Processing FPGA. This
was a corrective action.

202

Moved to secondary source for A/D. This was done to ensure availability.

203

Improved product packaging.

204

Added a JTAG connector that can be used to validate an FPGA
configuration loaded in the Processing FPGA. This was done to enhance
the feature set.

205

Moved to primary source for A/D. This was done to ensure availability.

SOL6M4AE30546*

100

First shipping version.

101

Replaced a pull-up resistor so that stronger PCIe interrupt signals could be
transmitted. This was a preventive action.

102

Removed termination resistors from the QDRII SRAM interface. This was a
corrective action.

103

Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.

1. Note that MIL automatically detects the version of the firmware and updates it if necessary.

RoHS-compliant versions of Matrox Solios eA/XA

Part number

Version

Description

Содержание Solios eA





































































































































































































Результаты поиска

Содержание Solios eA

Отзывы:

Matrox Solios eA, Установка и справочник по оборудованию, Страница: 165 / 196

Результаты поиска

Содержание Solios eA

Отзывы: