Matrox Solios eA Скачать руководство пользователя страница 114

Страница: 114 / 196

114 Appendix B: Technical information

• Four LVDS auxiliary output signals (exposure or user-defined output). See the

Matrox Solios hardware reference

chapter for supported configurations.

• Six TTL auxiliary I/O signals (trigger, field polarity, or user-defined input, or

exposure or user-defined output). See the

Matrox Solios hardware reference

chapter

for supported configurations.

• Four LVDS auxiliary input signals (trigger, field polarity, timer-clock, quadrature,

or user-defined input). See the

Matrox Solios hardware reference

chapter for

supported configurations.

• Four opto-isolated auxiliary input signals (trigger, field polarity, or user-defined

input). See the

Matrox Solios hardware reference

chapter for supported

configurations.

• Two LVDS serial ports.

Features specific to Matrox Solios eCL/XCL dual-Base/single-Medium in
single-Medium mode and Matrox Solios eCL/XCL-F

• Matrox Solios eCL/XCL dual-Base in single-Medium mode supports a single

video source in the Camera Link Medium configuration, while Matrox Solios
eCL-F supports a single video source in the Camera Link Full configuration.

• Matrox Solios eCL/XCL dual-Base/single-Medium is available in two maximum

Camera Link frequencies: standard Camera Link boards have a maximum
frequency of 66 MHz, while fast Camera Link boards support a maximum
frequency of 85 MHz. Matrox Solios eCL/XCL-F has a maximum frequency of
85 MHz.

• In single-Medium and single-Full modes, the programmable LUTs can be

operated in the following configurations

- 8 palettes of one, two, three, four, or eight 256-entry 8-bit LUTs.

- 4 palettes of one, two, three, or four 1024-entry 8- or 16-bit LUTs.

- 1 palette of one, two, three, or four 4096 entry 8- or 16-bit LUTs.

1. For example, two 1024-entry 8-bit LUTs can map 2-tap 10-bit data to 8-bit values. In

addition one 1024-entry 8-bit LUT can map 1-tap 10-bit data to 8-bit values.

Содержание Solios eA





































































































































































































Результаты поиска

Содержание Solios eA

Отзывы:

Matrox Solios eA, Установка и справочник по оборудованию, Страница: 114 / 196

Результаты поиска

Содержание Solios eA

Отзывы: