Matrox Monarch LCS, Руководство пользователя, Страница: 31 / 106

19
Network connection and IP address
Connecting to a network without a DHCP server
(Static IP mode)
When connecting to a network without a DHCP server, the network does not
assign an IP address to your Monarch LCS device. In this case, you must assign a
static IP address to Monarch LCS and you may be required to change your
computer’s network configuration to establish a connection between your
computer and Monarch LCS.
1
Power Monarch LCS (see “Powering Monarch LCS” on page 11 ).
2 Monarch LCS must be set to Static IP mode. By default, Monarch LCS is set
to DHCP IP mode. You can switch Monarch LCS to Static IP mode using the
Reset button (see
“Switch to Static IP mode” on page 13 ).
3
Establish a connection between Monarch LCS and your computer using one
of the following methods:
$
Connect an Ethernet cable from Monarch LCS LAN port directly to your
computer’s Ethernet port.
$
Connect an Ethernet cable from Monarch LCS LAN port to the same
network switch as your computer.
4 In order for your computer to communicate with Monarch LCS, your
computer’s IP address must be in the same network range as your Monarch
LCS IP address. If it isn’t, then you must change your computer’s IP address
accordingly. By default, the Monarch LCS static IP address is set to
169.254.1.11. If you’re using the default static IP address, you must change
your computer’s IP address and subnet mask to the following:
$
IP address 169.254.1.10
$
Subnet mask 255.255.0.0
¦ Note The default static IP address is designed primarily for the initial setup
of Monarch LCS using a point-to-point connection (direct connection between
your computer and Monarch LCS). The default IP address is not recommended
for a traditional network setting. If you wish to use Monarch LCS in Static IP
mode over a network, after the initial setup we recommend that you change
the static IP address of the Monarch LCS device to an address that is more
suitable to your network. You can change the static IP address in the Command
Center as specified in
“IP Setup tab” on page 55 .
5 Open the Command Center (see “Accessing the Command Center” on
page 20 ).
¦ Note
For more details on Monarch LCS IP modes, see “IP Setup tab” on
page 55 .