Matrox Monarch LCS, Руководство пользователя, Страница: 23 / 106

11
Matrox Monarch LCS hardware
Analog audio input
Allows you to input an unbalanced stereo analog audio source for streaming and
recording. To select whether to stream and record the first two audio channels
present in the selected video input or the audio connected to the Monarch LCS
analog audio input, see
“Configuring video and audio settings” on page 29 .
Powering Monarch LCS
Power the Monarch LCS device using an AC outlet via the external power supply
and a power cord. When power is supplied to Monarch LCS, the Power (
)
LED goes on, and the device begins a power-up sequence during which various
LEDs will flash on and off. The Warning LED (
) will begin to flash early
during the boot up sequence, and once it stops flashing, the Monarch LCS is
ready for use.
¦ Note
The Warning LED ( ) may remain on if there is an error condition (see
“Status page” on page 26 for more information).
To power off Monarch LCS, disconnect Monarch LCS from the power source.
For power specifications, see
Appendix D, “Matrox Monarch LCS
Specifications ”.
¦ Note
When the device is powered off, all current settings are maintained and
any logged errors are cleared (see “Monarch LCS errors” on page 27 ).
²Caution When
disconnecting the
power supply from
Monarch LCS, make
sure that you slide
back the casing on the
connector to release
the locking
mechanism.
External
power supply
To AC
outlet
Power cord
Monarch LCS