10
Matrox Xenia Series – User Guide
If your monitor has an HD-15 connector,
use a DVI to HD-15 adapter (sold
separately) to connect your monitor to the
main connector.
2
Attach the dual-monitor cable
Attach your dual-monitor cable to the
secondary connector (
B
) on your Matrox
card. Make sure the connectors are properly
fastened.
3
Connect the digital imaging
displays
Connect your first digital imaging display to the DVI connector labeled
1
of the dual-monitor
cable.
Connect your second digital imaging display to the DVI connector labeled
2
of the
dual-monitor cable.
Your Matrox card is now installed. Restart your computer and install your Matrox software (
).
Note:
While using an analog monitor,
certain limitations may apply. Specifically,
certain features are supported only while
using a digital monitor.
Monitor connector
(HD-15)
DVI to HD-15
adapter
Dual-monitor cable
WARNING:
To avoid damaging the LFH-60 connector
on your dual-monitor cable or on your graphics card,
carefully insert the connector on your dual-monitor cable
as straight as possible into the connector on your graphics
card. Specifically, inserting the connectors into each other
at an angle is likely to bend and damage the pins on the
connector of the dual-monitor cable.
Note:
Your Matrox dual-monitor cable
supports only digital monitors.
Monitor connector
(DVI)
