Matrox Convert DVI, Инструкция по установке и эксплуатации

Страница: 40 / 70

32
Chapter 4, Configuring Matrox Convert DVI
4
If you’re genlocking to an external source, from the Genlock Video Format
menu, select your external genlock source’s video format.
¡ Important
To ensure good output results, make sure that your external
genlock source’s video format is compatible with the Convert DVI video
output format.
5
If you’re genlocking to an external source, click Apply , and then use the
horizontal and vertical settings under Video Output Timing Offset to
adjust the timing of the video output relative to your external genlock source.
This lets you compensate for cable delays within your system. Click
Reset
to return a slider to its default position.
¦ Note
To automatically apply the timing offset settings, and to view the
timing offset adjustments live on your video output, make sure to Apply the
genlock settings before adjusting the timing offset. If you do not Apply the
genlock settings before, the timing offset settings will not be automatically
applied, and any adjustments you make will not be live on your video output.
6
Click Apply for the genlock changes to take effect. The Apply button is
active only when a change is made to the current genlock settings.
¥ Tip
Press
CTRL+1
to apply changes (see “Managing keyboard shortcuts”
on page 45 ).