Matrox Convert DVI, Инструкция по установке и эксплуатации

Страница: 37 / 70

29
Specifying your output settings
can also position the file manually by using your mouse to drag the graphic
to the desired position.
8 For Matrox Convert DVI Plus only, click Proc Amps to adjust the Hue ,
Chroma , Brightness , and Contrast levels of your video output. Click
Save as Default to save the current settings as the default settings, which
overrides the previously saved settings. Click Load Default at any time to
load the latest default settings. Click OK when done.
9
Under Audio Output , select Embed audio in SDI output if you want your
computer’s audio to be embedded in Convert DVI’s SDI output signal. Since
Convert DVI supports only one stereo pair (pair 1/2) from your computer on
input, and Convert DVI’s SDI output supports eight audio channels (four
stereo pairs), you must select the SDI stereo pair(s) that will be used to
output the audio from your computer. The stereo pair from your computer is
duplicated on every selected SDI stereo pair. For example, if
3-4 and 5-6 are
selected, the stereo pair from your computer will be outputted on SDI stereo
pairs 3/4 and 5/6. The SDI stereo pairs that are not selected are muted.
10 Click Apply for the changes to take effect. The Apply button is active only
when a change is made to the current output settings.
¥ Tip Press
CTRL+1
to apply changes (see “Managing keyboard shortcuts”
on page 45 ).