Matrix SG 650, Перевод оригинальной инструкции

Страница: 23 / 38

23
sound is heavy, while the income air becomes
weak, it means the container is full of dust. Please
shut off the power, turn off the container and
empty it. Please clean the filter, and the filter(part
3) in the motor house(fig 4).
After long time works, please wash the filters, the
container, the pipes, and the work heads, then
dry them by air before next use. You can keep
the whole container parts to store. But when you
take off the inlet cover(part e), be careful of the
filter(part f) and put back the cover for spray gun
and blower function.
Warning! It is not a toy, Out of children’s reach.
8.6 Used as a blower
Assemble the blower
Connect the blower head(part 13) to the outlet
pipe, switch on, the blower is working. Please
connect the head to the pipe tightly to avoid the
separation while using.
The blower is used to blow the lower pressure
items, and after a long time running, please shut
off the motor for rest if the machine is hot.
9 Maintenance and Care
9.1 Problem solutions
Supposed malfunctions, interferences and
damages often result from causes which can
be eliminated by the user. Therefore, check the
power tool using the instructions given below
before contacting an expert. Mostly, interferences
can be eliminated quickly.
1. Power Tool does not start
1.1 power supply interrupted
check power supply by connecting another
power tool
1.2 power cable or plug defective
inspection by electrician
1.3 other electrical defect of the power tool
inspection by electrician
2. power Tool does not have full power
2.1 extension cable too long and/or cross-section
too small
use extension cable with permissible length
and/or sufficient cross-section
2.2 voltage of power supply (e.g. generator) too
low
connect power tool to another power supply
3. Bad work results
3.1 nozzle or suction pipe clogged
clean
Note: Contact a qualified expert if the
interference experienced by you should not be
listed or if the given solutions are not suitable for
eliminating the malfunction.
9.2 Cleaning
9.2.1 General
Correct and regular maintenance is an important
aspect to ensure safe usage of the device and to
extent service life of the power tool.
Warning! Switch off the power tool
and unplug it before performing maintenance
and cleaning works in order to avoid risks such as
electric shocks.
Warning! Do not dip the power tool into
water or other liquids - risk of electric shock!
Always clean the electric paint sprayer
immediately after use.
Remove the plug from the mains socket before
cleaning.
Disconnect the container, and clean it using a
suitable detergent or thinner as per the paint
manufacturers instructions.
Fill the container with the appropriate detergent
or thinner and spray the paint sprayer until it is
clean.