16
Table of Contents
1 Intended Use
16
2 Technical Data
16
3 Safety Instructions and Warnings
16
4. Legend
20
5 Description
21
6 Scope of Delivery (Illustrations A + B) 21
7 Before using the Device
21
8 Working with the Power Tool
22
9 Maintenance and Care
23
10 Repairs
24
11 Storage and Transport
24
12 Disposal
24
1 Intended Use
The intended use of this power tool comprises
the application of varnishes, glazes and polishes.
Only liquids with a flashing point above 69,8 °F (21
°C) may be used.
The power tool may not be used to spray acid,
easy flammable, aggressive or explosive materials
(e.g. fuel, kerosene, cellulose thinners), aggressive
bases, acids, greases or oils.
The manufacturer does not assume liability in
case of unintended use as well as modifications
of the power tool.
The power tool may only be used for private and
not for commercial use.
Observe the safety instructions, all mounting and
operating instructions as well as the generally
applicable accident prevention regulations.
2 Technical Data
General
Nominal voltage:
230 - 240 V~
Nominal frequency:
50 Hz
Nominal output:
650 W
Protection class:
II /
Reservoir capacity:
max. 800 ml
Air consumption :
1.3 m
3
/min
Water consumption:
180 ml/min
Nozzle:
2.5 mm
Weight approx.:
1.4 kg
Sound
Sound pressure level L
pA
:
83.2 dB(A)
Sound power level L
WA
:
96.2 dB(A)
Uncertainty K: 3 dB
Vibration
Hand arm vibration a
h
:
2.1 m/s²
Uncertainty K: 1.5 m/s
²
Note:
The stated sound and vibration values have
been determined according to the EN 60745-1
standards.
Note:
The given vibration value has been
determined according to a standardised test
procedure and can be used to compare different
power tools with each other.
In addition, this value can be used to preliminary
assess impacts on the user caused by vibrations.
Warning!
Depending on the use of the power
tool, the actual vibration values may differ from
the given values.
Take measures to protect yourself from vibration
impacts. Observe the entire work procedure, i.e.
including the points in time where the power
tool works without load or is switched off.
Suitable measures comprise, amongst other
things, regular maintenance and care of the
power tool and the insertion tools, keeping the
hands warm, regular breaks as well as a good
planning of the work procedures.
3 Safety Instructions and Warnings
1. This device complies with the prescribed safety
regulations for electrical devices. Carefully read
the user manual before using the power tool.
Unintended use leads to injuries and material
damages. Persons who are not familiar with these
instructions may therefore not use the power
tool.
2. This power tool is not intended to be used
by persons (including children) with limited
physical, sensorial or mental abilities or with lack
of experience and/or lack of knowledge unless
Содержание SG 650
Страница 2: ...2 B1 B2 a c b 1 2 12 3 7 13 4 5 6 8 14 11 9 ...
Страница 3: ...3 B3 B4 B5 B6 B7 B8 B9 B10 d 6 5 7 14 ...
Страница 4: ...4 B11 B12 B14 B13 ...
