Matrix S3x-01, Руководство по обслуживанию, Страница: 9 / 64

5
CHApter 3: preVeNtAtIVe MAINteNANCe
3.3 CAre AND MAINteNANCe INStrUCtIoNS
In order to maximize life span, and minimize down time, all Matrix
equipment requires regular cleaning, and maintenance items
performed on a scheduled basis. This section contains detailed
instructions on how to perform these items and the frequency of
which they should be done. Some basic tools and supplies will be
necessary to perform these tasks which include (but may not be
limited to):
* Metric Allen wrenches
* #2 Phillips head screwdriver
* Adjustable wrench
* Torque wrench (capability to read foot lbs and inch lbs)
* Lint free cleaning cloths
* Teflon based spray lubricant such as "Super Lube" or other Matrix
approved products.
* Mild water soluble detergent such as "Simple Green" or other
Matrix approved products
* Vacuum cleaner with an extendable hose and crevasse tool
attachment.
You may periodically see addendums to this document, as the
Matrix Technical Support Team identifies items that require specific
attention, the latest version will always be available on the Matrix
web site at www.matrixfitness.com.
DAIly MAINteNANCe IteMS
1) Look and listen for loose fasteners, unusual noises, and any
other indications that the equipment may be in need of service.
2) Clean the stepper before and after each use, including:
a. Use a damp, soft cloth with water or mild liquid detergent
to clean all exposed surfaces. DO NOT use ammonia, chlorine, or
any acid based cleaners.
b. Keep the console display free of fingerprints and salt build
up caused by sweat.
WeeKly MAINteNANCe IteMS
1) Frequently vacuum the floor beneath the unit to prevent the
accumulation of dust and dirt which can affect the smooth operation
of the unit.
2) Check the pedals and belts for damage.
3) Check the unit for a low battery charge, recharge if needed.
MoNtHly MAINteNANCe IteMS
1) Inspect the console, pedals, handlebars, and shrouds for
damage.
2) Adjust the leveling feet if equipment rocks or wobbles.
QUArterly MAINteNANCe IteMS
1) Remove the front shrouds and check the belts for damage,
alignment, and proper tension.