Matrix S3x-01, Руководство по обслуживанию, Страница: 31 / 64

27
fIgUre b
fIgUre A
1) Remove the 2 screws holding the upper stationary handlebar junction to the console mast and lean it away from the console mast (Figure A).
2) Pull the defective upper stationary handlebar out of the upper stationary handlebar junction (Figure B).
3) Remove the 2 screws holding the bottom of the defective upper stationary handlebar to the lower stationary handlebar (Figure C).
4) This will allow you to remove the upper stationary handlebar (Figure D).
5) Reverse Steps 1-4 to install a new upper stationary handlebar. NOTE: Be sure to tighten the upper handlebar junction screws so that the
handlebars are even.
7.7 Upper StAtIoNAry HANDlebAr replACeMeNt
CHApter 7: pArt replACeMeNt gUIDe
fIgUre C
fIgUre D