Matrix S3x-01, Руководство по обслуживанию, Страница: 47 / 64

43
7.19 peDAl belt replACeMeNt
1) Remove the shrouds as outlined in Section 7.11.
2) Disconnect the pedal belt beneath the pedal frame by removing the 2 screws on the pedal re-tension bracket (Figure A).
3) This will allow you to remove the belt from the pedal frame (Figure B).
4) Disconnect the pedal belt spring from the drive axle set, and remove the pedal belt (Figure C).
5) Reverse Steps 1-4 to install a new pedal belt. NOTE: When reinstalling a new pedal belt, it is easier to attach the belt beneath the pedal
frame, then attach the pedal belt spring to the drive axle set.
6) Test the stepper for function as outlined in Section 7.22.
fIgUre A
fIgUre b
CHApter 7: pArt replACeMeNt gUIDe
fIgUre C