Matrix R3xm, Руководство пользователя, Страница: 5 / 16

5
NOTE:
Only Matrix Fitness service or certified assembly
personnel can assemble this equipment.
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts
and bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this off. If you have difficulty,
a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that
special attention must be paid. It is very important to follow
the assembly instructions correctly and to make sure all parts
are firmly tightened. If the assembly instructions are not
followed correctly, the equipment could have parts that are not
tightened and will seem loose and may cause irritating noises.
To prevent damage to the equipment, the assembly instructions
must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing
parts, contact Customer Tech Support. Contact
information is located on the information card.
ASSEMBLY
TOOLS REQUIRED:
F
4 mm Allen Wrench
F
6 mm Allen Wrench
F
Pedal Wrench (15mm)
F
Phillips Screwdriver
PARTS INCLUDED:
F
1 Main Frame
F
1 Rear Stabilizer Tube
F
1 Front Stabilizer Tube
F
1 Rear Frame Handle
F
1 Rear Frame Cover
F
1 Console Mast
F
1 Console Handlebars
F
1 Front Shroud Cover
F
1 Seat Assembly
F
1 Air Cylinder (for seat assembly)
F
1 Seat Base
F
1 Seat Back
F
2 Pedals
F
1 Hardware Kit
Console sold separately
NOTE:
1. This equipment is designed as an auxiliary device to
assist medical personnel to improve their patients’
health.
2. This equipment is designed for uses in cardiovascular,
physical rehabilitations and recoveries under medical
personnel’s instructions and monitoring.
3. This equipment conforms to IEC60601-1-2 and its
classification is Class 2a.
4. The waterproof level of this equipment is IPXO.
5. This equipment has no sterilization.
6. This equipment is not suitable for uses in Oxygen rich
environments.
7. This equipment is designed for continuous operation.
8. This equipment complies with WEEE directives for
disposal and recycling.
9. Ambient temperature for operating this equipment is
5°C - 40°C (with NO air-flow), nominal 25°C.
10. Relative Humidity for operating this equipment is 10% -
90% (non-condensing), nominal 40% (non-condensing).
11. Ambient temperature for shipping and storage this
equipment is from -20°C to 70°C (with NO air-flow).
12. WARNING: Do not modify this equipment without
authorization of the manufacturer.
13. Paramedics and medics are the users. Users are
trained to operate the device, R3xm, according to the
instructions.
14. The user sets workout program and directs Patient to
exercise.