Communication
This item set the communication mode, optional communication interfaces are RS232,
USB, PortSelect interface, BaudRate .
RS232 Communication Set
This item configures the baud rate for serial communication.Possible values are
4800,9600,19200,38400,57600,115200.When operating the power supply in remote
mode,make sure that you configure idential baud rate settings for the power supply and
the computer.
.
USB
Select communication mode via USB interface.
MemoryGroup
You can store up to 40 different operating states in a nonvalatile memory space.All saved
parameters are divided into four groups.They are Grp1,Grp2,Grp3 and Grp4.Each grop
can save 9 different operating states(1~9).
Command
This item set the communication protocol.Possible settings are SCPI,EXT1 and
EXT2.Default setting is SCPI.
ReturnMeter
This item enable(“Wait5Sec”) or disable(OFF) the function to turn back to meter state
automatically.When select “Wait5Sec”,the display on front panel will automatically change
to meter state under the condition of no operation,within 5S.
Reset
If you enter this menu and select “YES”,all parameters will be set to their default values.
Exit
Escape the menu.
Config
This item set the max voltage and outtimer of each channel.
Choose one channel and set the parameters.
MaxVolt
27
USER MANUAL
