Matrix MPS-6003LP-3, Руководство пользователя

Страница: 22 / 34

V-set I-set
When or button is lit, press (Local) key can switch between the three
channels.
4.5.2 OUT ON/OFF
Pressing
On/Off
button toggles the output state of all 3 channes of the power supply.If the
output state is ON,press it,to turn the output state to OFF.While the output state is
OFF,press
On/Off
and the power supply output will turn ON.
To control channels individually,press
corresponding to each channel. controls the output state of the first
controls the output state of the second channel,
(Shift)+
1
, (Shift)+
2
，
(Shift)+
3
(Shift)+
1
channel, (Shift)+
2
(Shift)+
3
controls the output state of the third channel.
When the power supply is in remote mode,you can set the output state by sending SCPI
command(OUTPut: ON | OFF).The output state operation does not affect any other
parameter.
Note: The
On/Off
key controls the output state of all 3 channels simultaneously.
If you want to control the output state of individual channels,use the number keys 1-3
with shift button.
4.5.3 Timer operation
If the “Outtimer”is enabled for any channel In the menu, after the time set, the specified
channel of the power supply will automatically switch to output off state. l. Please refer to
Out Timer of chapter 3.6
4.5.4 Set Voltage
V-set
Solution 1 : press (Local) to select channel, press then enter a numerical value
Enter
followed by .
V-set
Solution 2 : Press ,then press to move the cursor position and adjust the
voltage value using the knob. Press
Esc
or
Enter
to exit.
V-set
Solution 3 : Press ,then press to move the cursor position and adjust the
. Press
Esc
or
Enter
to exit. voltage value using
USER MANUAL
24