Matrix Vision mvBlueLYNX-X, Техническое руководство, Страница: 93 / 236

Figure 50: Boot sequence of mvBlueLYNX-X
You can change settings like the static IP address to your needs as follows:
Open the following file
/etc/network/interfaces
.
At the moment it looks like this:
...
...
auto eth0
iface eth0 inet dhcp
...
...
1.
Now change it to this, replacing the values with ones that match you network, e.g.:
...
...
auto eth0
iface eth0 inet static
address 192.168.0.202
netmask 255.255.255.0
network 192.168.0.0
gateway 192.168.0.200
...
...
2.
Some versions of the graphical Network Setup dialog box (Click on desktop: Menu Applications ->
Settings -> Network Setup) are known to write incorrect information to the file
/etc/network/interfaces
. If you do use this dialogbox then please check the file
/etc/network/interfaces
and remove any line that starts with the word
iface static
(e.g. like this:
iface static loopback dhcp
) before rebooting.
Alternatively, use zeroconf networking. In this case the mvBlueLYNX-X will use an IP address in the range
169.254.0.0/255.255.0.0
if it cannot obtain a dynamic address from a DHCP server.
It is not possible to wake up the mvBlueLYNX-X using wake-on-LAN magic network packets.
mvBlueLYNX-X Technical Manual
MATRIX VISION GmbH 22 April 2016 Version - 1.49 83