Matrix Vision mvBlueLYNX-X, Техническое руководство, Страница: 201 / 236

For the master camera, there are to possiblities how it is triggered:
The master camera triggers itself logically (so called Master - Slave, see figure 147), or 1.
the master camera uses the external trigger signal, which was created by itself, via digital input (so
called Slave - Slave, see figure 148). 2.
Figure 147: wxPropView - Master - Slave connecting
Figure 148: wxPropView - Slave - Slave connecting
With Master - Slave and according to the delay of the opto-isolated inputs of the slave cameras, you
have to adapted the property Trigger delay of the master camera to synchronize the cameras exactly.
As you can see in figure 147 and figure 148 you will need a dropping resistor of 2 kOhm, because the
opto-isolated inputs of the mvBlueFOX-MLC are not designed for high voltages (12 .. 24V).
20.7.3 Programming the acquisition
You will need two timers and you have to set a trigger.
20.7.3.1 Start timer
Two timers are used for the "start timer". Timer1 defines the interval between two triggers. Timer2 generates
the trigger pulse at the end of Timer1.
The following sample shows a trigger
which is generated every second and 1.
the pulse width is 10 ms: 2.
#include <mvIMPACT_CPP/mvIMPACT_acquire.h>
#include <mvIMPACT_CPP/mvIMPACT_acquire_GenICam.h>
mvBlueLYNX-X Technical Manual
MATRIX VISION GmbH 22 April 2016 Version - 1.49 191