manualshive.com logo in svg

Matrix Vision mvBlueLYNX-X, Техническое руководство, Страница: 23 / 236

Поделиться
Скачать
Matrix Vision mvBlueLYNX-X Скачать руководство пользователя страница 23

4  Graphic Symbols

4.1  Notes, Warnings, Attentions

NOTE A NOTE indicates important information that helps you optimize usage of the products.

WARNING A WARNING indicates how to avoid either potential damage to hardware or loss of data.

ATTENTION

An ATTENTION indicates a potential for property damage, personal injury, or
death.

All due care and attention has been taken in preparing this manual. In view of our policy of continuous
product improvement, however, we can accept no liability for completeness and correctness of the
information contained in this manual. We make every effort to provide you with a flawless product.

In the context of the applicable statutory regulations, we shall accept no liability for direct damage, indirect
damage or third-party damage resulting from the acquisition or operation of a MATRIX VISION product. Our
liability for intent and gross negligence is unaffected. In any case, the extend of our liability shall be limited to
the purchase price.

4.2  Webcasts

WEBCAST This icon indicates a webcast about an issue which is available on our website.

MATRIX VISION GmbH

22 April 2016 Version - 1.49

13

Содержание mvBlueLYNX-X













































































































































































































































Отзывы:

Нет отзывов