Matrix Telecom SIMADO GFX44, Быстрый старт

Страница: 8 / 32

LEDs
GSM Module GSM Module
Mobile 1 Mobile 2 Mobile 3 Mobile 4
When SIMCOM 3G module is used in SIMADO GFX44 then the call waiting
service must be disabled in the SIM Card inserted in the Mobile Port else it
will result in call disconnection in speech condition if another call is detected
by the module.
• Connect telephone instrument with CLI display to the FXS ports of GFX44
with the help of RJ11 cable.
• Connect COM Port of GFX44 to a computer using COM Port cable.
• Connect Power Socket of GFX44 to the power supply using 12V DC Adaptor
provided to you with the system and switch ON the power supply.
Switching ON SIMADO GFX44
After connecting the system as shown above, switch ON the power supply.
At power ON:
• Power LED glows green (continuously).
• After approximately 2 seconds all other LEDs pursue the following sequence:
Glow Red for 500ms
 Glow Green for 500ms  GSM initialization starts.
• GSM initialization takes approximately 50-60 seconds.
• On successful completion of GSM initialization, system explores the network.
• System takes few seconds for establishing connection with the network.
After successful registration with the network, all LEDs will turn off.