4
△
!
WARNING: the power supply is equipped with three-cell power cord, so the power supply
should be connected to three-cell socket. Before start up this machine, make sure it is grounded
very well.
② Cooling hole
③ Serial No.
④ Power input switching.
⑤ RS232 communication interface
⑥ Power input socket
3.2 Pre-check
Please check the power supply according to the following steps to ensure that the power
supply can be used normally.
1. inspection
Please check whether you receive the following attachments when you receive the power
supply. If there is any missing, please contact your nearest dealer.
A power cord (in line with the voltage standards used in the region).
An operation manual (standard)
A certificate of qualification (standard)
2. connect the power cord and turn on the power supply.
After power on, the power supply is self tested first, then enters standby mode.
3.3 if the power fails to start
1. check whether the power cord is connected properly.
Use the following methods to solve the problems you may encounter when you turn
on the power supply.
Model
fuse value
230V
115V
MPS-3603H
3.15A
5A
MPS-3605H
5A
6A
MPS-6003H
10A
12A
