12
At this point, the power return command is 1.245, which means the current supply
current value is 1.245a.
Order []MEASure:VC:?
The command is used to read two measurements at a time: output voltage and
output current.
Returns the command: numeric list, separated by commas in the middle.
Return parameters: V and a
Example: the order sent is: [:]
MEAS:VCM?
<LF>
At this time, the power return command is 10.0000,0.00000, that is, the output voltage
value of the current power is 10.0000v, and the output current value is 0.00000a.
6.2.4 Setup command
Order []OUTPut <bool>
1, the command is used to set the output of the power to turn on or not.
Return command: None
Parameters: type bool parameters, 0 - OFF, 1 - ON
Example: the sending instruction is: [:]
OUTP 1
<LF>
After the transmission is successful, the output of the power is set to open.
Order []VOLTage <Value>
1. The command is used to set the voltage value of the power supply.
Setting: v
Return command: None
Example:
1) send the command to [:]
VOLT 30.000
<LF>
That means the current voltage of the set power is 30V..
Example:
1) If you want to inquire the voltage setting value of the power supply, that is, the
order sent is: [:]
VOLT?
<LF>
Order []CURRent <Value>
1. The command is used to set the current value of the power supply.
Parameter: numerical |max|min
Setting: a
Return command: None
