MSC-HD42L Product Manual
Firmware
Query system firmware version.
FrameIP
[IP]
Remote router IP address the panel will
control.
Gateway
[IP]
Query or assign network gateway IP
address.
IP
[IP]
Query or assign device system IP address.
Lock
Get video lock status and rate detection
information (not all HD router systems are
supported).
MAC
Query system MAC address
MascotVer
Query Mascot protocol version.
MtxCfg * (2.0)
[0-7]
Query current matrix config.
Mt (2.4)
[LVL1][LVL2]
Query or assign I/O grouping.
NetMask
[NETMASK]
Query or assign network mask.
(2.1)
[0 | 1]
Query or assign I/O pairing enable (3D
support).
MtxGroup supersedes this
command.
PanelDis (2.4)
[0 | 1]
Query or assign internal panel button
interface disable.
PanelExtEn (2.4)
[0 | 1]
Query or assign external panel interface
enable (if available).
PanelOfs (2.1)
[DEST][SRC]
[LVL1][LVL2]
Query or assign button panel
destination/source offsets and levels to
control. Useful for configuring multiple
panels to control different I/O regions of a
router.
PanelRate (2.1)
[RATE]
Set remote panel refresh rate in seconds.
PsetNames *
[PRESET][LABEL] Query or assign preset names.
Reboot
Reboot the system.
Re (2.1)
[0 | 1]
Disable SDI reclockers (not all SDI router
systems are supported).
Remo (2.1)
[0 | 1]
Query or assign remote router syncing.
Useful for creating a 3D system out of 2
routers.
(2.4)
[0 | 1]
Query or assign Sierra Video Systems
protocol enable on serial port interface.
SrcNames *
[SRC][LEVEL]
[LABEL]
Query or assign source names.
SysName
[STR]
Query or assign system name.
WebPass
(STR)
Assign web password.
* Router systems and MSC-GCP2U32 LCD panel only.
+ Router systems only.
3.10 B Command
The B command is used for rebooting the system into Bootloader for software updates. See the Software
Update section for details.
Page 25 of 55
Copyright © 2013-2015 Matrix Switch Corporation
