MSC-HD42L Product Manual
3.8 Basic command reference
Basic commands consist of those commands which are used for modifying routing and other simple commands.
Mascot version where a command was added is indicated in parenthesis, (2.3) for example.
Command
Arguments
Description
Help
Display command help reference.
P *
[PRESET]
Recall a preset.
PAdd *
(PRESET)(DEST)(SRC)
[LEVEL]
Add a connection to a preset.
PClr *
(PRESET)
Clear a preset to “No Change” values.
PSub *
(PRESET)(DEST)
[LEVEL]
Subtract a connection from a preset.
PView *
[PRESET]
View preset contents.
Quit (2.3)
Quit TCP/IP telnet session.
S *
[1]
Matrix routing status (supplying 1 will
display labels).
SysType (2.3)
Query system hardware series.
Vars (2.3)
Query all system configuration variables.
W *
[PRESET]
Store current matrix routing to a preset.
X *
[DEST][SRC][LEVEL]
Perform a matrix connect operation.
* Router systems and MSC-GCP2U32 LCD panel only
3.9 Advanced command reference
These additional commands consist of those which are not as commonly used as the basic commands, such as
system configuration commands.
Mascot protocol versions where a command was added is indicated in parenthesis, (2.3) for example.
Command
Arguments
Description
B
(0 | 1)
Reboot system into Bootloader, typically
used for software update. A 0 or 1 value is
required and selects the Bootloader IP
address. A value of 0 uses 192.168.2.59 and
1 uses configured system IP.
C *
Query system matrix info, which is
displayed in the format
DESTS,SRCS,LEVELS,FLAGS1,FLAGS2.
MtxCfg command supersedes this
command.
DestNames *
[DEST][LEVEL]
[LABEL]
Query or assign destination names.
DHCP
[0 | 1]
Query or assign DHCP enable.
E *
[0 | 1]
Query or assign matrix connection echo
enable.
Page 24 of 55
Copyright © 2013-2015 Matrix Switch Corporation
