FIRST USE & BASIC OPERATION
Your Mate DynoLock Base comes ready to use right out of the box and in the open position.
1. Clean machine table
• Remove any metal bits, chips, or machining swarf
2. Begin with a clean base assembly
• Remove any metal bits, chips or machining swarf
3. Attach base to machine table with appropriate fasteners
Ò
M10 socket head cap screws are typically used
Ò
M12 screws will fit in most bases — see specific base specifications
• If keying locates base adequately, then tighten fasteners securely
• If base needs a precise positioning:
Ò
Loosely tighten fasteners enough to allow movement of base
Ò
Indicate position with probing, move base, repeat until position is correct
Ò
Tighten fasteners securely and re-check position