FIRST USE & JAW INSTALLATION/REMOVAL
Your Mate DynoGrip Self-Centering Vise comes precision tuned and ready to use right out of the box. If your use differs from the standard
installation, please consult the DynoGrip instructions by going to mate.com/wh or for fast access — scan the QR code on page 1 of this guide.
The DynoGrip vise comes with pre-installed locating pins for precision centering. Open jaws and remove the pins before first use and store.
It may be necessary to install or remove the jaws depending on the configuration of your purchase or the specifications of your use.
Below is a quick installation guide for jaw installation or removal.
A
A
B
B
C
C
A
A
B
B
C
C
Push here to install
Push here to remove
Insert jaw rail first
