Masterweld 200AC/DC, Инструкция по эксплуатации

Страница: 15 / 41

MASTERWELD 200 AC/DC
E
E
n
n
g
g
l
l
i
i
s
s
h
h
1
1
2
2
•
MMA mode. The values of both the HOT-
START and the ARC-FORCE have been set by the
manufacturer and can not be adjusted through the control
panel.
•
C
ONTINUOUS
T
IG
•
P
ULSED
T
IG
welding with pulsed current at L
OW
frequency (slow pulsed TIG)
•
P
ULSED
T
IG
welding with pulsed current at
M
EDIUM
frequency (fast pulsed TIG)
•
T
IG
A
C
with square wave
14
WELDING MODE
14.1 MMA WELDED WITH COATED ELECTRODE
14.1.1
I
NSTALLATION
Connect the electrode holder and the earth clamp to the
output sockets of the machine according to the polarity
required by the manufacture of the electrode that you
wish to use.
CAUTION! Make sure that the electrode does not touch
any metal part at all, since in this welding mode, the
output sockets of the machine are live.
14.2 TIG/TIG AC WELDING
14.2.1
I
NSTALLATION
Connect the TIG torch to the negative socket, P1.
Connect the earth clamp to the positive socket, P2.
Connect the gas pipe for the torch to the gas connector
A2.
Connect the torch connector to connector J2.
Connect the gas pipe from the gas bottle to the gas
connector A1.
If a TIG torch is used with cooling liquid connect the torch
feed pipe to the quick coupling
and the torch return
pipe to the quick coupling of the cooling unit.
Connect the unit’s power supply cable to connector Z1
and turn on the cooling unit from the relevant switch.
Connect the unit’s power supply cable to connector Z1
and turn on the cooling unit from the relevant switch.