28
EasyView 5 - User and Installation Manual
Failure
Possible cause
What to do
The display is in “Selection”
mode with another device
selected.
Change the setting to “All devices”.
Error in the wiring.
Check the MasterBus cables.
Device not suitable for
MasterBus or it is excluded in
the “Excluded” mode.
Check whether the device is suitable for
MasterBus. Maybe the MasterBus cable
is connected to a non-MasterBus
connector.
The EasyView 5 is
switched off after
some time.
The EasyView 5
is set up to
switch off automatically,
when no button is touched for
1 day.
See section 6.5 for settings (Auto off).
The device name is
not correct.
Device name has not yet
been set.
Adjust device name, see section 6.6.
Wrong language is
displayed.
Wrong setting of the
language at the EasyView 5.
See section 6.5 for adjustment of the
language.
Wrong setting of the
language at one of the
connected devices.
Each separate connected device can
have its own language setting. See user
manual of the connected devices.
Wrong system name
is displayed.
Wrong setting of the system
name at the EasyView 5.
See section 6.6 for setting “Name
system”.
You don’t have the
slightest idea where
in the menu structure
you have ended up.
You just discovered some
unexpected screens.
Tap the Home button, this always takes
you back to the home screen
Widget shows Device
offline
A device is not
communicating or has been
removed from the MasterBus
network.
Check the connections of the network
(see section 3.3).
If the device has been removed from
the network, go to edit mode and
remove the widget.
