November 2004 / Masterlink MICC / EN
13
Press and hold the
Select
button
for 5 seconds until the
green Select indication LED
flashes.
Press the
Select
button
five
times shortly until “BATTERY
BANK” is displayed.
Set the required voltage of the
main batteries using the
Set-up
button.
The Masterlink MICC will now be synchronised
and set in accordance with the installed
batteries.
4.4
Activate Mass Combi setting
You only have to activate (ON) this setting if you
are using the Masterlink MICC in combination
with the Mass Combi. The default setting is
“OFF”.
This menu can be entered by
holding the
Select
button for 5
seconds until the Select-LED is
flashing.
Now press the
Set-up
-button
shortly to enter the “program
menu”
Press the
Select
button 4 times
shortly until the “HFC MODE” is
displayed.
Select the required setting
using the
Set-up
button.
If this level is entered you can return to the user
menu by means of the
Set-up
button.
4.5
In case you are lost
If it is necessary to reset to factory defaults, go
to the “PROGRAM LEVEL” by holding the
Select
button
and
Set-up
button
simultaneously until both the Select-LED and
the Set-up-LED are flashing.
Next press the
Set-up
button
shortly
until
“RESET
FACTORY” is displayed.
After holding the
Set-up
- button
for 5 seconds the unit will be
reset to factory defaults.
BATTERY BANK
24V
RESET HISTORY
PRESS SET 5sec
Select
Select
Set-up
Set-up
Select
Set-up
Set-up
Select
Select
Set-up
HFC MODE
OFF
Set-up
Select
EXIT LEVEL
->PRESS SET-UP
Содержание 70403105
Страница 2: ...2 November 2004 Masterlink MICC EN...
