SAFETY GUIDELINES AND MEASURES
4
2 SAFETY GUIDELINES AND MEASURES
2.1
WARNINGS AND SYMBOLS
Safety instructions and warnings are marked in this
manual by the following pictograms:
A procedure, circumstance, etc which
deserves extra attention.
CAUTION!
Special data, restrictions and rules with regard
to preventing damage.
WARNING
A WARNING refers to possible injury to the
user or significant material damage to the
charger if the user does not (carefully) follow
the procedures.
2.2
USE FOR INTENDED PURPOSE
1
The Masterswitch 0 is constructed as per the
applicable safety-technical guidelines.
2
Use the Masterswitch 0 only:
•
in a technical correct condition;
•
observing the instructions in the users manual.
WARNING
Never use the Masterswitch 0 in situations
where there is danger of gas or dust explosion
or potentially flammable products!
3
Use of the Masterswitch 0 other than mentioned in
point 2 is not considered to be consistent with the
intended purpose. Mastervolt is not liable for any
damage resulting from the above.
2.3
ORGANIZATIONAL MEASURES
The user must always:
•
have access to the user's manual;
•
be familiar with the contents of this manual. This
applies in particular to chapter 2, Safety
Guidelines and Measures.
2.4
WARNING OF SPECIAL DANGERS
•
Check the wiring at least once a year. Defects such as
loose connections, burned cables etc. must be
corrected immediately.
•
Connection and protection must be done in
accordance with local standards.
•
Do not work on the Masterswitch 0 or system if it is still
connected to a power source. Only allow changes in
your electrical system to be carried out by qualified
electricians.
