3-21
Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Section 3: Operation
Masterflex
To operate the pump in Time Mode:
1. Tap TIME from the Mode Selection screen. The Time Mode Run screen will be displayed.
2. Tap EDIT
to access the Time Mode Edit screen.
3. Tap ON TIME to set the amount of time for each pump operation. The On Time Edit screen will be
displayed.
a. Tap HR, MIN, SEC or TENTHS and enter the desired time using the onscreen keypad.
b. Tap CONFIRM to save or CANCEL to discard changes and return to the
Time Mode Edit
screen
.
4. Tap OFF TIME to set the amount of time the pump will pause between each operation. The Off Time
Edit screen will be displayed.
NOTE:
If the off time is set to 0 (zero) the pump drive will require a start
input (from either the touchscreen or a wired input) to start the next dispense.
a. Tap HR, MIN, SEC or TENTHS and enter the desired time using the onscreen keypad.
b. Tap CONFIRM to save or CANCEL to discard changes and return to the
Time Mode Edit
screen
.
5. Tap FLOW RATE. The Flow Rate Edit screen will be displayed.
a. Tap UNITS to access the Flow Units screen and select the desired flow unit from the available list.
b. Tap CONFIRM to save or CANCEL to discard changes and return to the previous screen.
c. Tap FLOW and enter the desired flow rate using the onscreen keypad.
d. Tap CONFIRM to save or CANCEL to discard changes and return to the Time Mode Edit
screen.
6. Tap SIZE. The Tube Size screen will be displayed.
a. Select the desired tube size from the available list or
SCROLL
and tap CUSTOM to enter a
custom tube size using the onscreen keypad.
b. Tap CONFIRM to save or CANCEL to discard changes and return to the
Time Mode Edit
screen
.
7. Tap BATCH TOTAL to adjust the number of dispenses in each batch cycle. The Batch Total screen will
be displayed.
a. Enter the desired number of dispenses in a batch using the onscreen keypad.
NOTE:
If required,
tap INFINITE
∞
to select an infinite number of dispense cycles. If infinite is selected, the pump
will run continuously.
b. Tap CONFIRM to save or CANCEL to discard changes and return to the
Time Mode Edit
screen
.
8. Tap
CONFIRM
to return to the Time Dispense Mode Run screen.
9. Tap DIRECTION to select either clockwise
or counterclockwise
flow direction.
10. Tap START . The pump will now operate until the batch total is completed or until PAUSE or
STOP is tapped.
11. If required, adjustments can be made to any of the Time Mode option settings during operation. To make
any adjustments:
