background image

5

®

SETUP

Use only Microbore Autoanalysis tubing with 
MASTERFLEX C/L pumps to ensure optimum 
performance. Use of other tubing may void 
applicable warranties.

Selecting Tubing Size

Appendix A provides a list of tubing sizes which will work 
efficiently with the MASTERFLEX C/L Pump System. This 
list includes tubing diameters, flow rates in µL/min and the 
maximum flow rates at 10 rpm, 80 rpm and 300 rpm. Tubing
is listed by part number.

Installing Tubing in Pump Head 

WARNING: Before installing tubing into the Pump

Head remove power or shut off the drive.
Fingers or loose clothing could be
caught in the rollers.

1. When the door is opened the Occlusion Bed moves back

away from the pump rollers, 

Figure 4

.

2. Holding both ends of the tubing in one hand, form a loop and

wrap the tubing around the 

Rollers

Figure 4

, making sure

that the tubing is centered on the rollers and keeping the free
ends of the tubing outside of the 

Tubing Retainers

Figure 4

.

3. Once the tubing is in place, close the Door and the

Occlusion Bed will automatically align itself within the pump,

Figure 5

.

4. Insert the tubing into one of the 

Tubing Retainers

Figure 4

,

by moving the retainer toward the center of the pump and
placing the tubing in the v-notch of the retainer. Release the
retainer so that the tubing is secured in place.  Repeat for the
other tubing retainer. The tubing should be stretched slightly
around the rollers so that there is no excess tubing between
the rollers and the retainers – any excess can be removed by
pulling slightly on the tubing outside of the pump. 

Figure 3.  Pump — Rear Panel

DC Power Input,

2.5 mm Coaxial Receptacle

Backup

DC

Input

Remote

Start/Stop

Input

Shorting Bar

The 

rear panel,

Figure 3,

contains a DC power input jack for

connection of primary power and a 4-terminal barrier strip for
connection of remote start/stop and for a DC backup supply.

Figure 4.  Occlusion Bed in Unlatched Tube Loading Position

Figure 5.  Closing Occlusion Bed

Shorting Bar

Occlusion

Bed

Tubing

Retainers

Rollers

Occlusion

Bed

Occlusion

Bed

Occlusion

Bed

Содержание C/L 77122-04













Отзывы: