Masterflex C/L 77122-04, Руководство по эксплуатации

Страница: 11 / 12

11
®
Tubing Tubing Flow Rate
Suffix. ID 10 rpm 80 rpm 300 rpm
in (mm) (µL/min) (µL/min) (µL/min)
-10 0.007 (0.19) 13.0 100 425
-12 0.010 (0.25) 22.5 180 730
-14 0.015 (0.38) 50.5 400 1650
-16 0.017 (0.44) 67.0 535 2200
-18 0.020 (0.51) 87.0 700 2900
-22 0.025 (0.64) 135 1050 4500
-24 0.030 (0.76) 185 1450 6250
-26 0.035 (0.89) 245 1950 8300
-28 0.040 (1.02) 315 2500 10400
-30 0.045 (1.14) 385 3100 13000
-32 0.051 (1.30) 485 3850 16300
-34 0.056 (1.42) 565 4500 19100
-36 0.060 (1.52) 635 5100 21300
-38 0.065 (1.65) 730 5850 24700
-40 0.073 (1.85) 885 7100 29800
-42 0.081 (2.06) 1050 8500 35200
-44 0.090 (2.29) 1250 9350 41000
-46 0.100 (2.54) 1450 10200 46200
-48 0.110 (2.79) 1650 11000 50000
All flow rates based on pumping water @ 0 psig 70°F (21°C).
See the following table for Tubing size versus ID and flow
rates. Flow rates are for water pumped at room temperature
and 0 psi.
Flow rate is determined by drive, speed, tubing size and
material.
Tubing Flow Rates