A
DJUSTING
&
R
EPLACING
M
AIN
& S
IDE
B
RUSHES
Adjusting Main Brush
1)
Remove the top cover.
2)
Untighten locknut, and turn adjusting
handle clockwise to increase pressure
and counterclockwise to decrease pres-
sure.
3)
The adjusting handle works like a
ratchet.
Note:
When the lever is pulled up it can
be rotated without changing the brush
adjustment.
4)
Tighten locknut and replace cover.
Replacing Main Brush
The Main Brush is made in 3 sections,
each section is divided in half.
To Remove Main Brush:
1)
Remove the front waste bin.
2)
Unscrew and remove the 6 screws
holding the main brush sections in
place.
3)
Remove dissembled brush.
To Install Main Brush:
1)
Take a brush section and place it
around the shaft, securing the section
with the brush screws.
2)
Repeat this operation for each brush
section.
Note:
Make sure the brush spins and
directs dirt and debris to the center of
the sweeper.
3)
Replace front waste bin.
Adjusting Side Brush
1)
Loosen the adjusting screws.
2)
Use the slots to position the brush at
the required height.
3)
Tighten the two adjusting screws.
Replacing Side Brush
1)
Lift the front part of the sweeper.
2)
Untighten the brush screw and
removing the brush.
3)
Replace the brush and secure with
the screw and washer.
P
AGE
7