P
AGE
6
C
LEANING
O
UT
F
RONT
& R
EAR
W
ASTE
B
INS
Removal of Front Bin
1)
Lift and turn the waste bin locks.
2)
Grasp both handles and grip located on
the front part of the waste bin.
3)
Pull upward to remove the waste bin.
4)
Empty the waste bin.
Reinstall Front Bin
1)
Place the waste bin back in the sweep-
er from the top.
2)
Lock in place by turning and lowering
the waste bin locks.
Removal of Rear Bin
1)
Lift and turn the waste bin locks.
2)
Grasp the handle and pull the waste bin
out of the sweeper.
3)
Empty the waste bin.
Reinstall Rear Bin
1)
Place the waste bin back into the
sweeper.
2)
Lock in place by turning and lowering
the waste bin lock.
Turn OFF all controls before cleaning out the waste bins.
Waste must be disposed of in strick accordance to the law.
C
AUTION
:
C
LEANING
&
R
EPLACING
F
ILTER
Cleaning Filter Using
Filter Shaker:
1)
Using the manual lever, push down on it
as the filter vibrates, dirt and dust will fall
into to waste bin.
2)
Repeat this operation several times.
Note:
If dust still forms when the sweeper
is operating, remove and clean the filter.
Cleaning in Heavy Dust
Environments:
When using the sweeper particularly in a
dusty environment (cement factories,
sawmills, marble processing factories),
use the filter shaker more frequently.
Cleaning the Filter:
It is recommended to periodically remove
the filter and clean it out with a blast of air
or a vacuum cleaner.
To Remove The Filter:
1)
Remove the rear waste bin.
2)
Turn the two levers holding filter in
place and lift out the filter.
3)
Clean the filter with a blast of air or
vacuum cleaner.
4)
Reinstall the filter.
NOTE:
The filter features an arrow that
shows the direction in which it should be
fitted.
Replacing the Filter:
Every 200 hours of work, the filter must
be replaced.
1)
Remove the filter (See instructions
under Cleaning the Filter).
2)
Install a
NEW
filter and make sure the
gasket and filter are dust tight.
The filter is one of the sweepers main components and is essential to its operation. It
is important to follow filter maintenance procedures to obtain the best cleaning
results. If you notice that dust forms when the sweeper is operating, check the filter.