MasterCraft 55-6847-0, Руководство по эксплуатации

Страница: 12 / 23

IMPORTANT: Do not use thin-kerf blades.
Thin-kerf blades can deflect and contact the guard,
which can cause injury to the operator.
Mitre adjustment
1. Lock the saw head in the down position, and loosen the mitre-lock knob.
2. Hold the cutting handle firmly to rotate the mitre table to any desired angle. The most common
angle settings have positive stops: 0°, 15°, 22.5°, 31.6°and 45°.
3. Tighten the mitre-lock knob and release the saw head.
Mitre-angle indicator adjustment (if necessary)
Fig.6
1. Place the mitre table at the zero position, making sure that
the mitre lock is secured in position.
2. Loosen the mitre-angle indicator screw and adjust the
indicator to the “0” mark on the mitre scale. (See Fig. 6.)
3. Tighten the mitre-angle indicator screw.
Indicator screw
Mitre scale
Bevel adjustment
1. When a bevel cut is required, loosen the bevel lock (Fig.1,
point 19) by turning it counter-clockwise.
2. Tilt the saw head to the desired angle, as shown on the
bevel scale. The blade can be positioned at any angle, from
a 90° straight cut (0° on the scale) to a 45° left bevel. (See
Fig. 7.)
3. Tighten the bevel lock to secure the saw head.
Fig.7
Bevel
angle
indicator
12