ACCESSOR
Y USE
Accessory Description
Accessory Use
Dressing stone
Cleans grinding wheels and stones. Shapes or reshapes stones for
desired applications.
Silicon carbide (green)
•
Stones
•
Wheels
Designed to work well on stone, glass, ceramics, porcelain and non-
ferrous metals.
Polishing wheel
•
Emery-impregnated
Ideal for cleaning and polishing coarse surfaces.
Stainless steel brush
Stainless steel brushes do not cause “after-rust” when used on
corrosive-resistant materials like pewter, aluminium and stainless
steel.
Mandrel for emery-
impregnated polishing wheel
Use with emery-impregnated polishing wheel.
Carbide grout cutter
Ideal for use on wall and floor grout.
Flap wheel
Flap wheels grind and polish flat or contoured surfaces. They are used
most effectively to finish a surface after heavier sanding and material
removal have been completed.
Diamond wheel point
Great for cutting, sawing and carving of hard materials such as
marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and
hard wood.
Engraving Cutter
For detail engraving, carving and routing in wood, fibreglass, plastic
and soft metals.
Tungsten-carbide cutter
Use for shaping, smoothing and material removal. Use on hardened
steel, stainless steel, cast iron, non-ferrous metals, fired ceramics,
plastics, hard woods and other hard materials.
NOTE: This Rotary Tool is also compatible to most accessories
and attachments provided by other leading brands.
18
OPERA
TING INSTR
UCTIONS
19
fig. 1
ON/OFF & Speed control switch
Both the ON/OFF and speed control functions are
controlled by one switch (1) located on the top of
the tool (fig. 1).
To turn the tool ON, slide the switch to the left. To
turn the tool OFF, slide the switch to the right.
To increase the speed, turn the tool ON and
continue to slide the switch to the left. To decrease
the speed, slide the switch to the right.
Changing the collet
Some accessories require the use of different
sized collets. Collet sizes can be 1/16", 3/32" and
1/8". It is important to ensure that the collet size
matches the accessory.
NOTE:
This tool includes the most commonly used
collets: 1/16", 3/32" and 1/8".
WARNING:
Using a collet that
is too large for the accessory will result in the
accessory possibly being thrown from the tool
causing serious injury.
1.
Turn the tool switch OFF and remove the
plug from the power source.
2.
Depress the spindle lock button (1) and
slowly turn the collet nut (2) until the spindle
lock button locks the spindle (4) (fig. 2).
3.
While holding the spindle lock button down,
turn the collet nut counter-clockwise until it
is removed.
4.
Remove the collet (3) by pulling it out of the
spindle.
fig. 2
!
DELUXE CORDED ROTARY TOOL KIT 054-4892-4
DELUXE CORDED ROTARY TOOL KIT 054-4892-4
