MasterCraft 54-2903-2, Руководство пользователя, Страница: 19 / 37

19
INSTALLING THE AUXILIARY SIDE
HANDLE
Install the auxiliary handle (1) for two-
handed operation of the drill (Fig. 8). This
is particularly important for hammer drilling
in concrete.
NOTE: The auxiliary handle can be
installed on either the left or right side of
the hammer drill.
1. Insert the threaded mounting screw
(2) through the depth stop rod clamp
(3) and into the threaded hole in the
drill housing (4).
NOTE: Make sure the key in the clamp is
aligned with the matching slot in the drill
housing.
2. Turn the auxiliary handle clockwise to
tighten it into the drill housing.
NOTE: Tighten the handle by hand only.
Do NOT overtighten the handle or you will
damage the handle or the housing.
BIT STORAGE IN AUXILIARY HANDLE
Screwdriver bits and drill bits can be stored
in the auxiliary handle.
1. To store bits in the auxiliary handle
(1), remove the end cap (2) by turning
it counter-clockwise (Fig. 9).
2. Insert the bits to be stored in the
handle.
3. Insert the end cap into the handle and
tighten it into place by turning it
clockwise.
ASSEMBLY AND OPERATING
Fig. 8
Fig. 9