MasterCraft 54-2903-2, Руководство пользователя, Страница: 14 / 37

14
POSITIONING THE CHARGER
Position the charger (1) in a dry location
within 5
’ (1.5 m) of a 110–120 V 60 Hz
electrical outlet. The charger can either be
placed with its rubber feet on a table or
workbench, or hung on a wall.
1. To hang the charger on a wall, place 2
nails or screws (1) in the wall where
you want the charger to hang (Fig. 1).
NOTE: The nail or screw heads must be
1/4" (6.4 mm) in diameter, and the head
must be left 3/8" (8.3 mm) out from the
wall, placed 3" (7.62 cm) apart.
2. Place the large mounting access hole
(2) over the nail or screw head and
slide the charger downward until it
hangs on the nail or screw.
STORING THE CHARGER
To store the charger, simply wrap the cord
around the charger (1) and insert the cord
into the cord clip (2) (Fig. 2).
ASSEMBLY AND OPERATING
Fig. 1
Fig. 2