background image

11

10

Compatible compressors

Air system

General use

GUIDELINES FOR PROPER USE AND OPERATION

Potential hazard that could result in serious injury or death

.

MASTERCRAFT

®

Quick connector 

Quick coupler 

Air hose 

Lubricator

Regulator (0 to 8.5 bar)

Filter

Cut-off valve

Air compressor

                           Air-powered 

Coil Roofing Nailer 

Always use clean, dry, regulated, compressed air at 4.8 to 7.5 bar (70 to 110 PSI).

Do not exceed the maximum or minimum pressures. Operating the tool at the wrong 

pressure (too low or too high) will cause excessive noise or rapid wear.

WARNING!

Keep hands and other parts of the body away from the tool’s discharge 

and working areas when connecting the air supply. Failure to comply 

could lead to serious injury or death.

 TECHNICAL INFORMATION

 TECHNICAL INFORMATION

model no. 058-9809-8 | contact us 1-800-689-9928

This Mastercraft

®

 Air-powered Coil Roofing Nailer drives 3/4 to 1 3/4" wire-collated coil nails.

The tool is lightweight and durable, stands up to the elements and provides consistently 

accurate results over the life of the tool. An ideal tool for a variety of construction projects, 

including installation of asphalt roofing shingles and insulation boards, and features a 

high-capacity side-load magazine, adjustable drive depth, durable construction, and more.

Be sure to use a proper air compressor with Mastercraft

®

 air-powered tools. The compressor 

should be able to supply a minimal air delivery of 4.7 CFM @ 90 PSI to ensure the compressor 

can run continuously with the Mastercraft

®

 Air-powered Coil Roofing Nailer.

Air Compressor
Size and Power

1 1/2–2 HP                2 1/2 HP                   3+ HP

4–6 Gallons

 

8–11 Gallons 

15+ Gallons

Light-duty and

intermittent use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Heavy-duty and

continuous use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Heavy-duty and

continuous use

Wood Density

 Nail Size                                   Compressor Air Pressure

>0.6 g/cm

3

≤0.6 g/cm

3

<1" (25 mm) 

≥1" (25 mm)

<1" (25 mm) 

≥1" (25 mm) 

90 PSI (6.3 bar)

75 PSI (5.2 bar)

120 PSI (8.3 bar)

110 PSI (7.5 bar)

model no. 058-9816-0 | contact us 1-800-689-9928

Содержание 058-9816-0
















Отзывы: