MasterCraft 058-8434-4, Инструкция по эксплуатации

Страница: 7 / 32

SAFETY GUIDELINES
7
AIR - POWERED CLIPPED - HEAD FRAMING NAILER 058 - 8434 - 4
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not allow unskilled or untrained individuals to operate the Air - powered
Clipped - Head Framing Nailer.
• Do not use the Air - powered Clipped - Head Framing Nailer for any task other
than that it is designed to perform.
• Do not use the Air - powered Clipped - Head Framing Nailer unless it has been
instructed to use.
• Locate the compressor in a well - ventilated area for cooling, at a minimum of
12 " (31 cm) away from the nearest wall.
• Protect the air hose and the power cord from damage and puncture. Inspect
them for weak or worn spots every week, and replace them if necessary.
• Always wear hearing protection when using the air compressor. Failure to do
so may result in hearing loss.
• Do not carry the compressor while it is running.
• Do not operate the compressor if it is not in a stable position.
• Do not operate the compressor on a rooftop or an elevated position that
could allow the unit to fall or be tipped over.
• Always replace a damaged gauge before operating the unit again.