MasterCraft 058-8434-4, Инструкция по эксплуатации

Страница: 8 / 32

SAFETY GUIDELINES
8
AIR - POWERED CLIPPED - HEAD FRAMING NAILER 058 - 8434 - 4
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Always ensure that the tool has stopped before connecting it to the air
supply.
• Do not wear watches, rings, bracelets, or loose clothing when using any air
tool.
• Do not overload the tool. Allow the tool to operate at its optimum speed for
maximum efficiency
.
• Do not use a tool that is leaking air, with missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
• Always k eep your air tool clean and lubricated. Daily lubrication is essential
to avoid internal corrosion and possible failures.
• Ensure the floor is not slippery and wear non - slip shoes. Floor should be
kept clean and clear.
• Always follow all workshop safety rules, regulations, and conditions when
using the Air - powered Clipped - Head Framing Nailer.
• Carry the tool by the handle only, k eeping the finger away from the trigger.
Do not carry the tool by the hose, magazine or any other parts.
• Do not use the tool near or below the freezing condition, as doing so may
cause tool failure.
• Do not store the tool in a freezing environment to prevent ice formation on
the operating valves of the tool, as doing so may cause tool failure.
• Handling and storage of oil: Use with adequate ventilation. Avoid contact of
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a
tightly closed container in a cool, dry, well - ventilated area free from
incompatible substances.